Replacement of screen on Acer Chromebook CP311 2H screen made by LaptopScreen.com

Tools

For the replacement process we will need a plastic pick and a metal pick

Turn off the laptop

To begin turn the laptop off and disconnect the power cord

Separate the display assembly

Start removing the display assembly. Insert the plastic pick between the assembly and the back cover
on the right side. Move the pick along the edge up and down. Continue separating the display assembly
on the left side. Insert the pick in the top left corner and move it along the edge to the opposite side

Disconnect the video cable

Use a metal pick to peel off the clear tape securing the video cable. Using plastic pick open
the connector's bracket. Disconnect the video cable

Detach microphone and webcam board

Using Phillips screwdriver remove the screw holding the microphone at the top of the front assembly.
Detach the microphone from the assembly. Using plastic pick detach the webcam board from
the assembly. Release the webcam and microphone cable from its channel and put it aside.
Discard the old display assembly

Insert the microphone and webcam board into new assembly

Take the new assembly and put it on the keyboard. Insert the webcam
and microphone cable into its channel. Insert the webcam board in its slot.
Then insert the microphone in its slot. Secure the microphone with a Phillips screw.
Make sure that all cables are in the right positions

Connect the new assmbley

Reconnect the video cable. Close the connecto's bracket. Secure it with a clear tape.
CAUTION! It is very important not to force any connectors. As well you must not twist
or slant the connector when plugging it in

Snap the new assembly into the back cover

Lift the screen up. Press firmly in the bottom corners then go around the perimeter
snapping the tabs back in place. Close the laptop and make sure that the tabs are closed
at the bottom of the screen

Turn the laptop on. And we are done!